Home » Brother International Manuals » Label Makers » Brother International TJ-4020TN » Manual Viewer

Brother International TJ-4020TN Users Guide - Page 65

Ethernet Settings, Status, Con Static IP

View all Brother International TJ-4020TN manuals

Add to My Manuals
Save this manual to your list of manuals

Page 65 highlights

7.3.2 Ethernet Settings Configure your printer's Ethernet (wired) connection and check its status. When the Ethernet is connected, the Ethernet icon and IP address appear on the Touchscreen as shown below. Menu Interface Ethernet Status Configure Item Status Configure Description Check the Ethernet IP address and Mac address setting status. DHCP: Enable (On) or disable (Off) the Dynamic Host Configuration Protocol (DHCP) network protocol. Static IP: Set the printer's IP address, subnet mask, and gateway. Note For information about installing a printer driver, see section 5.1.3 Wired Network Connection (Windows). 61

Section	Page
User's Guide TJ-4005DN/4010TN/TJ-4020TN/4021TN/4021TNR/TJ-4120TN/4121TN/4121TNR	1
Contents	3
1. Introduction	5
1.1 Product Introduction	5
1.2 Additional Product Reference	5
2. Operations Overview	6
2.1 Unpack the Label Printer and Check the Components	6
2.2 Printer Overview	7
2.2.1 Front View	7
2.2.2 Interior View	10
2.2.3 Rear View	11
2.3 Control Panels	12
2.3.1 LED Indicators and Buttons	13
2.3.2 Home Screen Icons (Touchscreen Models Only)	14
2.3.3 Touchscreen Overview	15
3. Set Up Your Printer	20
3.1 Connect the Power Cord	20
3.2 Load the Ribbon (Not available for TJ-4005DN)	21
3.3 Remove Used Ribbon (Not available for TJ-4005DN)	24
3.4 Load the Media	25
3.4.1 Load Label Roll	25
3.4.2 Load External Media	28
3.4.3 Load the Media in Peeler Mode (Optional)	31
3.4.4 Load Media in Cutter Mode (Optional)	35
4. Improve Print Quality	40
4.1 Adjust Print Head Tension to Improve Print Quality	40
4.2 Avoid Wrinkled Labels	40
4.2.1 Adjust Ribbon Tension (Not available for TJ-4005DN)	40
4.2.2 Change the Print Density/Darkness Settings	42
4.2.3 Try Different Media	42
5. Printing	43
5.1 Printer Driver Installation	43
5.1.1 USB Connection (Windows/Mac/Linux)	43
5.1.2 Wi-Fi Network Connection (Windows)	44
5.1.3 Wired Network Connection (Windows)	45
5.2 Set the Direct Thermal / Thermal Transfer Print Methods (Not available for TJ-4005DN)	46
5.3 Create and Print Labels Using BarTender	48
6. Operation	49
6.1 Power-on Utilities	49
6.1.1 Gap/Black Mark Sensor Calibration	50
6.1.2 Gap/Black Mark Sensor Calibration, Self-Test, and Entering Dump Mode	51
6.1.3 Printer Initialization	55
6.1.4 Media Sensor Calibration (for the Black Mark Sensor)	56
6.1.5 Media Sensor Calibration (for the Gap Sensor)	56
6.1.6 Skip the AUTO.BAS Program	57
7. Change Printer Settings using the Touchscreen	58
7.1 Setting Menu	58
7.1.1 FBPL Settings	58
7.1.2 ZPL2 Settings	60
7.2 Sensor Settings	63
7.3 Interface Settings	64
7.3.1 Serial Communication Settings	64
7.3.2 Ethernet Settings	65
7.3.3 Wi-Fi Settings	66
7.3.4 RFID (Radio Frequency Identification) Settings	68
7.4 Advanced Settings	74
7.5 File Manager	75
7.6 Diagnostic Functions	76
8. Brother Printer Management Tool (BPM)	77
8.1 Start the BPM	77
8.2 Auto-Calibrating the Media Sensor using the BPM	78
9. Setting Up the RFID	79
9.1 Introduction	79
9.2 RFID Calibration	80
9.2.1 Load the RFID Media	80
9.2.2 RFID Calibration Procedure	81
10. Product Specifications	84
11. Troubleshooting	87
11.1 Common Problems	87
11.2 Touchscreen Error Messages	89
11.3 RFID Error Messages	90