Brother International XL-3500 Users Manual - English - Page 12
Flat Bed Attachment, Using a Free-arm Style
View all Brother International XL-3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
KNOWING YOUR SEWING MACHINE Put a different presser foot on the needle plate 3 so that the bar on the presser foot is in line with the slot on the shank. Lower the presser foot lever and fix the 4 presser foot onto the shank. If the presser foot is in the correct place, the bar should snap in. Flat Bed Attachment The accessories are stored in a compartment inside the flat bed attachment. Slide the flat bed attachment to the left to 1 open it. 1 1 1 Shank ■ Presser Foot Installation Orientation 2 1 Flat bed attachment 2 Storage compartment Note ● Put the accessories inside a bag, and then store the bag inside the compartment. If the accessories are not in a bag, they may fall out and be lost or damaged. Using a Free-arm Style Free-arm sewing is convenient for sewing tubular and hard-to-reach areas. To change your machine to the free-arm style, lift out the flat bed attachment. Slide the flat bed attachment to the left to 1 release it. CAUTION ● If the presser foot is not installed with the correct orientation, the needle may strike the presser foot, which may bend or break the needle and cause injury. 10 1 1 Flat bed attachment