Brother International XM2701 Operation Manual - Page 23
Drawing up the lower, thread
View all Brother International XM2701 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
While lightly holding the thread, turn the 6 needle threader lever toward the front of Pass the end of the thread through the 0 presser foot, and then pull out about 5 cm the machine (toward you). The hook will pull the thread through the needle. (2 inches) of thread toward the rear of the machine. 1 Raise the needle threader lever. 7 1 1 5 cm (2 inches) Note ● If you incorrectly feed the thread you may cause sewing problems. Pull the loop of the thread passed through 8 the eye of the needle toward the rear of the machine. Drawing up the lower thread While lightly holding the end of the upper 1 thread, slowly turn the handwheel toward you (counterclockwise) by hand to lower and then raise the needle. 1 1 Loop of thread CAUTION ● Be careful not to pull on the thread with force or it may bend the needle. ● If the thread does not pass through the eye of the needle, start from step 3 again. Raise the presser foot lever. 9 Pull on the upper thread to draw up the 2 lower thread. 1 2 1 2 1 Upper thread 2 Lower thread 22