Brother International XR4040 Users Manual - English - Page 16
Threading The Machine - parts
View all Brother International XR4040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
KNOWING YOUR SEWING MACHINE THREADING THE MACHINE Winding the bobbin This section describes how to wind the thread onto the bobbin. • For details on the fast bobbin winding, see page 17. a Bobbin-winding thread guide b Bobbin winder shaft c Bobbin CAUTION ● Only use bobbins (part code: SA156, SFB) that have been designed for this sewing machine. Using other bobbins may cause damage to the machine. ● We designed the bobbin that comes with this machine. If you use bobbins from other models, the machine will not work properly. Only use the bobbin that comes with this machine or bobbins of the same type (part code: SA156, SFB). Actual size 11.5 mm (7/16 inch) This model Other models As shown, press down on the spool pin lever a with your finger. X The spool pin swings up. Remove the spool cap. b CAUTION ● Do not grab the bar to raise the spool pin, otherwise, the spool pin may bend or break. a Spool pin b Spool cap CAUTION ● Be sure to raise the spool pin when winding the bobbin. The thread may become tangled if the bobbin winder is used without raising the spool pin. 14