Brother International XR4040 Users Manual - English - Page 40
Adjusting the stitch length, and width
View all Brother International XR4040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
SEWING BASICS Adjusting the stitch length and width ■ [Example] Selecting stitch . Press the stitch selection keys to select stitch 04. a With on the right, select "4", and with on the left, select "0". Press the "+" or "-" side of (stitch b length adjustment key) to increase or reduce the stitch length. Press the "+" or "-" side of (stitch width c adjustment key) to increase or reduce the stitch width. a Stitch width b Stitch width adjustment key c Narrow d Wide Note ● When the stitch length or stitch width is changed from the standard setting, around or disappears from the LCD. When the stitch length or stitch width is reset back to the standard setting, reappears around or in the LCD. ● If the stitch width of the selected stitch cannot be adjusted, "-. -" appears to the right of in the LCD. a Stitch length b Stitch length adjustment key c Short d Long CAUTION ● After adjusting the stitch width, slowly turn the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break. ● If the stitches are bunched together, increase the stitch length. Continuing to sew with the stitches bunched together may result in the needle bending or breaking. 38