Brother International Z-8560A Instruction Manual - English - Page 41
Setting the zigzag stop position, <Sewing machine operation when sewing stops>
View all Brother International Z-8560A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
6. USING THE OPERATION PANEL (BASIC OPERATIONS) 6-2-5. Setting the zigzag stop position When the plain zigzag, 2-step zigzag, 3-step zigzag or scallop sewing patterns are selected, you can set whether the needle stops when it is at the right side or the left side of the sewing pattern. (If the right stopping has been set, the needle stop position will be the position shown by ○ in the illustration below.) * When the straight stitch, blind stitch or custom-made sewing patterns have been selected, the zigzag stop position setting is ignored. When right stopping or left stopping is set, the sewing machine will keep running until the set position is reached, even if the treadle is returned to the neutral position or depressed backward. • For plain zigzag, 2-step zigzag and 3-step zigzag, the needle will stop at the stitch furthest to the right if right stopping has been set, or at the stitch furthest to the left if left stopping has been set. • For the scallop sewing pattern, the needle will stop at the next right-side stitch if right stopping has been set, or at the next left-side stitch if left stopping has been set. Example: When right stopping has been set Treadle stopped * When the needle stops in the needle up stop position, the last stitch does not form part of the seam. If the treadle is depressed backward at this time, the seam is formed at that position. (Stop) Plain zigzag 3-step zigzag Scallop 1342M No position specified Left stopping • The indicator illumination changes as shown in the illustration at left and the zigzag stop position setting changes each time the zigzag stop position key is pressed. • If right stopping or left stopping has been set, the indicator also illuminates during sewing so that you can check the setting. Right stopping 3433M When right stopping has been set, sewing starts from the right side. When left stopping has been set, sewing starts from the left side. • If the needle stops in the needle down stop position, the needle will be raised to the needle up stop position when the treadle is depressed backward. (The workpiece can then be changed.) The next sewing operation starts from the same position. NOTE: Do not press the half stitch key or correction key or turn the machine pulley by hand to move the needle to the needle up stop position. Doing so will cancel the effect of the zigzag stop position function. 33 Z-8550A, 8560A