Browning BPS Owners Manual - Page 13
Assembly - stocks and forearms
View all Browning BPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
your finger and push up on the button. Left-handed shooters simply lift up on the button with your trigger finger. Specific uses of the slide release button are outlined in the following sections. FIGURE 4 A S S E M B LY The BPS is delivered, in the box, with the barrel removed and the Push the forearm forward until the rear of the forearm is even with the front of the receiver. forearm still attached to the magazine tube. WARNING: IT IS IMPORTANT TO FOLLOW THE EXACT SEQUENCE FOR ASSEMBLY IN STEPS 1 AND 2, IN ORDER TO PROPERLY ASSEMBLE YOUR BPS. ALWAYS PLACE THE "SAFETY" IN THE "ON SAFE" POSITION BEFORE BEGINNING ASSEMBLY PROCEDURES. 1 Remove the magazine cap. Depress the slide release and pull the forearm completely to the rear-most position. 2 Hold the stock/receiver in a horizontal position with the ejection port down. Then, with the forearm already in the fully rearward position, push the forearm forward until the rear of the forearm is even with the front of the receiver (Figure 4). FIGURE 5 FIGURE 6 Barrel Stabilizing Beveled Surface Lock Washer Forearm Barrel Magazine Cap Be sure the barrel tab aligns with and enters the recess in the front, upper surface of the receiver. 12 Magazine Tube Barrel Stabilizing Barrel Split Ring Guide Ring Place the barrel stabilizing lock washer on top of the barrel stabilizing split ring.