Bushnell 119466C Instruction Manual - Page 20

Parameter Settings Description (Bold=default) Field Scan On, Off Turns Field Scan (Time Lapse) recording mode on/off. Pressing OK with On selected will go to the Set Field Scan screen, which allows you to set the Start and Stop times in hours (0-24) and minutes (00-59).This is setting the time each day for recording to begin and end (24 -hr clock, so 13:00 hours=1PM). Use the RIGHT key to step through the fields, and use UP/DOWN to change the settings. After you set the "Stop" minutes, the next press of the RIGHT arrow key will jump to the screen for setting the Interval (how often the Trophy Cam will wake up and record). You can select 60, 30, 15, 5 or 1 minutes (default is 5M). Video Sound On, Off (only affects video clips) Select "On" to record audio along with the video when the camera is set to video mode (saved file sizes will be slightly larger). Default Set Cancel, Execute Select "Execute" and press OK to restore all parameters to the original factory default settings. If the camera is behaving oddly and you think you may have changed the setting for something accidently (but aren't sure which one), this will reset all parameters to their most commonly used or "generic" settings. 20