Campbell Scientific 109 109-L Temperature Probe - Page 15
and 41303-5A Radiation Shield on a Tripod Mast
View all Campbell Scientific 109 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
41303-5A 109 Model 109 Temperature Probe Tools required for installing a radiation shield to a tripod or tower include: • 1/2 inch open end wrench • small screw driver provided with datalogger • small Phillips screwdriver • UV resistant cable ties • small pair of diagonal-cutting pliers 41303-5A 109 Tripod Mast or Tower Leg FIGURE 7-1. 109 and 41303-5A Radiation Shield on a Tripod Mast Tripod Mast or Tower Leg CM200 Series Crossarm FIGURE 7-2. 109 and 41303-5A Radiation Shield on a CM200 Series Crossarm 9
Model 109 Temperature Probe
Tools required for installing a radiation shield to a tripod or tower include:
•
1/2 inch open end wrench
•
small screw driver provided with datalogger
•
small Phillips screwdriver
•
UV resistant cable ties
•
small pair of diagonal-cutting pliers
FIGURE 7-1.
109 and 41303-5A Radiation Shield on a Tripod Mast
FIGURE 7-2.
109 and 41303-5A Radiation Shield on a CM200 Series
Crossarm
41303-5A
109
Tripod Mast
or Tower Leg
41303-5A
109
Tripod Mast
or Tower Leg
CM200 Series Crossarm
9