Campbell Scientific A150 A150 Desiccated Case - Page 9
CWS900 Connector
View all Campbell Scientific A150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
A150 Desiccated Case Anemometer BLACK Signal Pulse WHITE Signal Reference CLEAR Shield WHITE BLUE GREEN RED BLACK CLEAR #26972 Cable 1 (Pin #) 2 3 #22018 4 PWENC Connector 5 6 FIGURE 6. Anemometer Wired to an A150 4.3 #19520 CWS900 Connector Figure 7 shows the A150 terminal block with a CWS900 attached. This configuration allows a CS450 or other sensor to be attached to the A150 while the CWS900 wireless sensor interface completes the connection to the wireless sensor network. WHITE BLUE GREEN RED BLACK CLEAR #26972 Cable 5 (Pin #) 2 1 #19520 4 CWS900 Connector 3 6 BLACK FIGURE 7. A150 with CWS900 Connector Figure 8 shows a CS450 connected to an A150. Note how multiple grounds are combined into a single lead wire using the lever nut. Pressure Sensor CS450 Sensor RX (In) BLUE Sensor TX (Out) WHITE Power RED BLACK Power GND Digital GND YELLOW CLEAR Shield Vent TUBE N.C. BLACK N.C. A150 WHITE BLUE GREEN RED BLACK CLEAR #26972 Cable Terminates in A150 Enclosure 5 (Pin #) 2 1 #19520 4 CWS900 Connector 3 6 FIGURE 8. A150 Wired for CS450 Pressure Sensor and CWS900 Connector 5