Campbell Scientific CS120A CS120A Visibility Sensor - Page 22
CS120A recommended wiring using Campbell Scientificcables
View all Campbell Scientific CS120A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
CS120A Visibility Sensor 8.1 CS120A recommended wiring using Campbell Scientific cables (this cable is supplied already connected as standard) The CS120A is provided pre-wired with a default 5 m power and communications cable which is terminated at one end with a 9 pin D-connector (DB9). The Dconnector can be connected directly to a PC or to a datalogger such as the Campbell Scientific CR1000 using a suitable interconnecting cable such as the SC110. If another type of connection is required then the D-connector should be removed. 12
CS120A Visibility Sensor
12
8.1
CS120A recommended wiring using Campbell Scientific
cables
(this cable is supplied already connected as standard)
The CS120A is provided pre-wired with a default 5 m power and communications
cable which is terminated at one end with a 9 pin D-connector (DB9). The D-
connector can be connected directly to a PC or to a datalogger such as the
Campbell Scientific CR1000 using a suitable interconnecting cable such as the
SC110. If another type of connection is required then the D-connector should be
removed.