Campbell Scientific CS120A CS120A Visibility Sensor - Page 37

Entering the CS120A menu system

Get Campbell Scientific CS120A PDF manuals and user guides View all Campbell Scientific CS120A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

User Guide NOTE The maximum response time to a poll command is 100 ms. If the setting to check the checksum on received commands is enabled the checksum varies with the Sensor ID value. 14. Entering the CS120A menu system NOTE The user can enter the menu system by typing 'open id' into their terminal program then pressing the return key on their keyboard. The id corresponds to the sensor ID number. The Sensor ID number can be in the range of 0 to 9. The factory default is 0. The 'open 0' command is not normally echoed. The terminal menu only gives access to more common settings. The following text should now be displayed: WELCOME TO THE CAMPBELL SCIENTIFIC LTD CS120A SETUP MENU ID 0 S/N 1009 (1) Message output menu (2) User alarm menu (3) Calibrate CS120A (4) System information (5) Communications setup The displayed options are accessed simply by typing the corresponding number then (p9re)ssiEngxiretturann. Nd oscahavneges will take effect until you `save and exit'. The excep(t0io)n tEoxthiits isatnhde cdaloibnr'attionsmaveneu, but you will be informed before any changes are made. -> The displayed options are accessed simply by typing the corresponding number then pressing return. No changes will take effect until you `Exit and Save'. The exception to this is the calibration menu, but you will be informed before any changes are made. Typing `1' opens the message menu containing settings relating to the CS120A's outputs. 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
User Guide
27
The maximum response time to a poll command is 100 ms.
If the setting to check the checksum on received commands is enabled the
checksum varies with the Sensor ID value.
14.
Entering the CS120A menu system
The user can enter t
he menu system by typing ‘open
id
’ into their terminal
program then pressing the return key on their keyboard.
The
id
corresponds to the
sensor ID number. The Sensor ID number can be in the range of 0 to 9. The
factory default is 0.
The ‘open 0’
command is not normally echoed.
The terminal menu only gives access to more common settings.
The following text should now be displayed:
The displayed options are accessed simply by typing the corresponding number
then pressing return. No changes
will take effect until you `
Exit and Save’
. The
exception to this is the calibration menu, but you will be informed before any
changes are made.
Typing `1’ opens the message menu containing settings relating to the
CS120A
’s
outputs.
NOTE
NOTE
WELCOME TO THE CAMPBELL SCIENTIFIC LTD CS120A SETUP
MENU
ID 0
S/N 1009
(1) Message output menu
(2) User alarm menu
(3) Calibrate CS120A
(4) System information
(5) Communications setup
(9) Exit and save
(0) Exit and don't save