Campbell Scientific SVP48 SVP48 Surge Voltage Protector - Page 3

SVP48 Surge Voltage Protector 1. Overview The SVP48 provides transient protection for up to 22 conductors. Typical usage is to place the SVP48 in line between sensors and a Campbell Scientific datalogger to supplement the datalogger's built in surge protection. The SVP48 is designed to mount on Campbell Scientific's standard enclosure back plates with 1 inch centered, pre-punched square accessory mounting holes. The SVP48 consists of one or more surge protectors mounted on a DIN rail bracket. A single end plate is used to cover the last surge protector. 1.1 Physical Dimensions Length: 6.6 inches Width: 2.6 inches Height: 2.72 inches The two mounting holes in the DIN rail are spaced 6 inches apart center to center. 1.2 Specifications Surge protection is provided by gas filled arrestors that trigger at 110 VAC or 156 VDC. Each surge protector protects one conductor and provides a terminal for shield wires. 1