Canon 0329B001 OPTURA60 OPTURA50 Instruction Manual - Page 137
Troubleshooting
UPC - 013803050691
View all Canon 0329B001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Tr Trouble? oubleshooting If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a Canon Service Center if the problem persists. E Power Source Problem Solution Camcorder will not turn on. Battery pack is exhausted. Replace or charge the battery 18 pack. Attach the battery pack correctly. 18 The camcorder switches off Battery pack is exhausted. Replace or charge the battery 18 by itself. pack. Power save function has been activated. Turn on the 30 camcorder. Cassette compartment will Battery pack is exhausted. Replace or charge the battery 18 not open. pack. Open the cassette compartment cover fully. 21 Cassette compartment Battery pack is exhausted. Replace or charge the battery 18 stopped during loading/ pack. unloading. LCD/viewfinder switches on Battery pack is exhausted. Replace or charge the battery 18 and off. pack. Battery pack will not charge. Charge the battery pack in temperatures between 32 °F and - 104 °F (0 °C and 40 °C). Battery packs become hot with use and may not charge. Wait - until the battery pack temperature is below 104 °F (40 °C) and retry charging. The battery pack is damaged. Use a different battery pack. - Recording/Playback Trouble? Problem Solution Buttons will not work. Turn on the camcorder. 30 Load a cassette. 21 Abnormal characters appear This camcorder uses a microcomputer. External noise or static - on the screen. The camcorder electricity may cause abnormal characters to appear on the does not operate properly. screen. In such case, disconnect the power source and reconnect it after a short time. If the problem still persists, disconnect the power source and press the RESET button with a pointed item. Pressing the RESET button resets all settings. " " flashes on the screen. Load a cassette. 21 " " flashes on the screen. Battery pack is exhausted. Replace or charge the battery 18 pack. " " flashes on the screen. Condensation is detected. See reference page. 140 "REMOVE THE CASSETTE" Unload and reload the cassette. 21 appears on the screen. The wireless controller will not Set [WL.REMOTE] to [ON]. 75 work. The battery of the wireless controller is exhausted. Replace 25 the battery. 137