Canon 0329B001 OPTURA60 OPTURA50 Instruction Manual - Page 139
Memory Card Operation, Printing, Editing
UPC - 013803050691
View all Canon 0329B001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Problem The tape stops during playback pause. Solution When playback pause continues for more than 4 minutes 30 - seconds during playback or audio dubbing, the camcorder shuts off to protect tape and video heads. Playback the tape again and press the / pause button. E Memory Card Operation Problem Memory card cannot be inserted. Memory card cannot be recorded. Memory card cannot be played back. Image cannot be erased. " " flashes red. Solution Memory card was not facing the correct direction. Turn the 22 memory card over and reinsert it. Insert a memory card. 22 Memory card is full. Replace the memory card or erase 104 images. Memory card is not formatted. Format the memory card. 105 File number reached maximum value. Set [FILE NOS.] to 73 [RESET] and insert a new memory card. SD Memory Card is protected. Change the position of the 22 protect switch. Set the camcorder to CARD PLAY mode. 41 Insert a memory card. 22 Image is protected. Cancel the protection. 103 SD memory card is protected. Change the position of the 22 protect switch. Card error occurred. Turn off the camcorder. Remove and 105 reinsert the memory card. Format the memory card if flashing persists. Printing Problem Solution The printer is not operating 1. Set the camcorder to CARD PLAY mode. - even though camcorder and 2. Disconnect and reconnect the USB cable. printer are correctly 3. Turn off the printer and turn it back on. connected. Editing Trouble? Problem Solution Dubbing via the camcorder's Set [AV DV/ ] (OPTURA60) or [AV DV] (OPTURA50) to 73 DV terminal does not work. [OFF]. Wrong signal format. Dubbing may work via the AV terminal. - Refer also to the instruction manual of the connected device. 139