Canon 1265B001 PowerShot TX1 Camera User Guide Advanced - Page 121
Subject in recorded image is too bright, or, image flashes white., Image contains noise., White dots
View all Canon 1265B001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Subject is too far away for z Shoot within correct flash range of flash to reach. the subject when using the built-in flash (p. 138). z Raise the ISO speed and then shoot (p. 65). Subject in recorded image is too bright, or image flashes white. Subject is too close, z Shoot within correct flash range of making the flash too the subject when using the built-in strong. flash (p. 138). The subject is z Set the exposure compensation to a overexposed because the negative (-) setting (p. 52). surroundings are too z Use AE lock or use the spot metering dark. function (pp. 49, 51). Too much light is shining z Change the shooting angle. directly into the camera, or is being reflected off the subject. Flash is set to on. z Set the flash to Guide p. 15). (flash off) (Basic Image contains noise. ISO speed is too high. z Higher ISO speeds and the (High ISO Auto) setting may increase image noise. For higher image quality, select as low an ISO speed as possible (p. 65). z In , , , and modes, the ISO speed increases and noise can appear. White dots appear on the image. Light from the flash has z This is a phenomenon that occurs reflected off dust particles with digital cameras and does not or insects in the air. This constitute a malfunction. is particularly noticeable when shooting using the wide angle. Troubleshooting 119