Canon 1265B001 PowerShot TX1 Camera User Guide Advanced - Page 39
Setting the Display Overlay
![]() |
View all Canon 1265B001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
z The interval between shots lengthens when the built-in memory of the camera fills. z If the flash is used, the interval between shots lengthens because the flash must charge. z When set to , images will be shot with Face Detect AF set to [Off] (p. 46). Setting the Display Overlay Shooting Mode You can check a composition's horizontal and vertical alignment as well as a 3:2 aspect ratio print range on the LCD monitor by using a shooting guide while shooting. Displays grid lines dividing the monitor into 9 areas, Grid Lines allowing you to check the subject's horizontal and vertical alignment. 3:2 Guide You can check what can be printed in a composition using a 3:2 aspect ratio*. The portion that will not print displays in gray. * Images are recorded at the same aspect ratio of 4:3 as shown in the normal viewing mode. Both You can display both the grid lines and 3:2 guide at the same time. 1 (Rec.) Menu [Disp. Overlay] [Grid Lines]/[3:2 Guide]/[Both]. See Menus and Settings (p. 22). [Off]*/ * Default setting. Shooting z The grid lines and 3:2 guide do not appear on recorded images. z When shooting a movie, only [Grid Lines] can be used. 37
![](/manual_guide/products/canon-powershot-tx1-powershot-tx1-camera-user-guide-advanced-1ce9df8/39.png)