Canon 2050C User Manual - Page 82
Double-sided scanning is not possible., The scanned image is skewed. - black lines
UPC - 013803051407
View all Canon 2050C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Symptoms The scanned image is too dark (or faint). Problem The [Brightness] setting is not set to an appropriate value. Solution If the image is dark, set a higher [Brightness] setting, or if the image is faint, set a lower [Brightness] setting. (See "Software Settings," on p. 49.) Symptoms Text or images on the rear side of your document appear in the scanned image. Problem The [Brightness] setting is too low, or the paper is too thin. Solution Set a higher [Brightness] setting. If the paper is too thin, make a copy of the documents and then scan the copy. Symptoms Double-sided scanning is not possible. Problem "Scanning Side" is set to [Simplex]. Solution Set "Scanning Side" to [Double-sided]. Symptoms A black margin appears around the scanned document. Problem A document smaller than the preset paper size has been scanned. Or, the loaded document has shifted out of position. Solution Set "Paper size" to [Auto-detection]. Or, set [Border Removal] to on. Symptoms The scanned image is skewed. Problem The document has been fed at an angle. (skew) Solution Use the document guide adapter to prevent document skew, and set [Deskew] to on. (See p. 22.) Symptoms Lines, smudges, or dirt appear on the scanned image. Problem CauseThe scanning glass or rollers inside the scanner are dirty. Solution Clean the scanning glass and rollers. If lines still appear on the image even after cleaning the scanning glass and rollers, the scanning glass inside the scanner may be scratched. Contact your local authorized Canon dealer or service representative. (See p. 59.) 76 Appendices