Canon 2473B002 User Manual - Page 29

Basic Operation FILTER button Remote Control Unit Press and hold the FILTER button for more than 5 seconds to operate electrically operated filter to replace the filter. ✔Note: • When the filter is replaced, the total accumulated time of the filter use is automatically set to 0. BLANK button Press the BLANK button on the remote control unit to black out the image. To restore to normal, press the BLANK button again or press any other button. MOUSE POINTER button P-TIMER button POINTER button KEYSTONE button "Blank" disappears after 4 seconds. FILTER button BLANK button MOUSE POINTER button Move the pointer on the screen with this button. POINTER button Press POINTER button on the remote control unit to display the Pointer on the screen. ✔Note: • See the previous page for the description of other buttons. P-TIMER button Press the P-TIMER button on the remote control unit. The Timer display "00 : 00" appears on the screen and starts to count time (00 : 00-59 : 59). To stop the P-TIMER, press the P-TIMER button. To cancel the P-TIMER, press the P-TIMER button again. P-Timer display KEYSTONE button Press the KEYSTONE button on the remote control unit. The "Keystone" appears on the screen. Use the Point ed7 8 buttons to correct keystone distortion. The keystone adjustment can be stored (pp.40, 44). • The white arrows indicate that there is no correction. • A red arrow indicates the direction of correction. • An arrow disappears at the maximum correction. • If you press the KEYSTONE button on the remote control unit again while the Keystone dialog box is being displayed, the keystone adjustment will be canceled. • "Keystone" disappears after 10 seconds. Reduce the upper width with Point e button. Reduce the lower width with Point d button. Reduce the left part with Point 7 button. Reduce the right part with Point 8 button. 29