Canon 2473B002 User Manual - Page 78
Serial Control Interface, Operation
![]() |
UPC - 013803089745
View all Canon 2473B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Appendix Serial Control Interface This projector provides a function to control and monitor the projector's operations by using the RS-232C serial port. Operation 1 Connect a RS-232C serial cross cable to CONTROL PORT on the projector and serial port on the PC. (See p.20) 2 Launch a communication software provided with PC and setup the communication condition as follows: Baud rate Parity check Stop bit Flow control Data bit : 9600 / 19200 bps : none : 1 : none : 8 ✔Note: • The default of the baud rate is set to 19200 bps. If an error occurs in the communication, change the serial port and the communication speed (baud rate). 3 Type the command for controlling the projector and then enter the "Enter" key. Example When you want to change the input to INPUT 2, Type 'C' '0' '6' 'Enter'. ✔Note: • Enter with ASCII 64-byte capital characters and onebyte characters. 78
![](/manual_guide/products/canon-2473b002-user-manual-92ffe77/78.png)