Canon 2508B001 PowerShot SD1100 IS / DIGITAL IXUS 80 IS Camera User Guide - Page 102
Adjusting the Tone White Balance
View all Canon 2508B001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
100 z Use the LCD monitor to confirm that the image was recorded at the desired brightness. z Please note that camera shake becomes a factor at low shutter speeds. Shoot with the camera attached to a tripod. z Use of the flash may result in an over-exposed image. If this occurs, shoot with the flash set to . Adjusting the Tone (White Balance) Available Shooting Modes p. 222 Normally, the (Auto) white balance setting selects an optimal white balance. When the setting cannot produce natural looking colors, change the white balance using a setting appropriate for the light source. Auto Settings are automatically set by the camera. Day Light For recording outdoors on a bright day. Cloudy For recording under overcast, shady or twilight skies. Tungsten For recording under tungsten and bulb-type 3wavelength fluorescent lighting. Fluorescent For recording under warm-white, cool-white or warm-white (3-wavelength) fluorescent lighting. Fluorescent H For recording under daylight fluorescent, or daylight fluorescent-type 3-wavelength fluorescent lighting. Custom Adjusts the optimal white balance for the shooting conditions using the white balance data retained in the camera from a white-colored object, such as a white paper or cloth.