Canon 2508B001 PowerShot SD1100 IS / DIGITAL IXUS 80 IS Camera User Guide - Page 187
Subject in recorded image is too bright, or image, flashes white., Image contains noise., White dots
![]() |
View all Canon 2508B001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
185 Subject in recorded image is too bright, or image flashes white. Subject is too close, making z Shoot with the subject within the the flash too strong. correct flash range when using the built-in flash (p. 207). The subject is overexposed z Set the exposure compensation to a because the surroundings negative (-) setting (p. 97). are too dark. z Use the AE Lock or spot metering functions (pp. 95, 98). Too much light is shining z Change the shooting angle. directly into the camera, or is being reflected off the subject. Flash is set to on. z Set the flash to (Flash off) (p. 64). Image contains noise. ISO speed is too high. z Higher ISO speeds and (High ISO Auto) setting may increase image noise. For higher image quality, use as low an ISO speed as possible (p. 71). z In , , , , , and , the ISO speed increases and noise can appear. White dots appear on the image. Light from the flash has z This is a phenomenon that occurs reflected off dust particles or with digital cameras and does not insects in the air. This is constitute a malfunction. particularly noticeable when shooting using the wide angle. Troubleshooting
![](/manual_guide/products/canon-sd1100-powershot-sd1100-digital-ixus-80-camera-user-guide-0e9e0e1/187.png)