Canon 2805B002 Instruction Manual - Page 11
Turning on the Power Switch
View all Canon 2805B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Turning on the Power Switch 1 Set the power switch to . X The flash recycling starts. 2 Check that the flash is ready. When the pilot lamp lights in red, the flash is ready to fire (fully charged). To fire a test flash, press the button. About Auto Power Off To save battery power, the power will turn off automatically after a certain period (approx. 1.5 min. to 15 min.) of idle use. To turn on the Speedlite again, press the camera's shutter button halfway. Or press the Speedlite's button. A test firing cannot be fired while the camera's operation timer 4 or 0 is active. The Speedlite's settings will be retained in memory even after the power is turned off. To retain the Speedlite's settings after you replace the batteries, turn off the power and replace the batteries within 1 minute. 10