Canon 2805B002 Instruction Manual - Page 27
Set the master unit., Set the 430EX II as the slave unit., Check the communication, channel., Set - speedlite 430ex ii
![]() |
View all Canon 2805B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Wireless Flash With multiple Canon Speedlites having the wireless flash feature, you can create various lighting effects with the same ease as using normal E-TTL II autoflash. The settings you input with the master unit attached to the camera are also automatically transmitted to the slave units which are controlled by the master unit via wireless. Therefore, you need not operate the slave unit(s) at all during the shoot. For details on wireless flash photography and operating the master unit, see the master unit's instruction manual. The procedure below applies to a master unit attached to the camera and slave unit(s) controlled by wireless. 1 Set the master unit. Attach the master unit Speedlite to the camera and set it as necessary. 2 Set the 430EX II as the slave unit. Hold down the button for 2 sec. or more. 3 Check the communication channel. If the master unit and slave unit(s) are set to a different channel, set them all to the same channel (p.29). 4 Set the slave ID. Set the slave ID when using two (A and B) or three (A, B, and C) slave groups (p.30). 5 Position the camera and Speedlites. Position the slave unit(s) within the master unit's wireless transmission range. 26
![](/manual_guide/products/canon-0298b002-instruction-manual-c9a8ed1/27.png)