Canon 3079B001 VIXIA HF11 Instruction Manual - Page 110
Paper Lever Error, Printer Cover Open
View all Canon 3079B001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Additional Information HARDWARE ERROR - Cancel printing. Turn off the printer and turn it back on. Check the printer status. If the printer is equipped with a battery, it might be exhausted. In such case, turn off the printer, replace the battery and turn it back on. INCOMPATIBLE PAPER SIZE - The paper settings of the camcorder conflict with the printer's settings. INK ABSORBER FULL - Select [CONTINUE] to resume printing. Consult a Canon Service Center (refer to the list included with the printer) to replace the ink absorber. INK ERROR - There is a problem with the ink. Replace the ink cartridge. LOW INK LEVEL - The ink cartridge needs to be replaced soon. Select [CONTINUE] to restart printing. NO INK - The ink cartridge is not inserted or is out of ink. NO PAPER - Paper is not correctly inserted or there is no paper. NO PRINTHEAD - No print head is installed in the printer or the print head is defective. PAPER ERROR - There is a problem with the paper. The paper is not correctly loaded or the paper size is wrong. Alternatively, if the paper output tray is closed, open it to print. PAPER JAM - The paper jammed during printing. Select [STOP] to cancel printing. After removing the paper, set some paper again and retry printing. PAPER LEVER ERROR - Paper lever error occurred. Adjust the paper selection lever to the proper position. PRINT ERROR - Cancel printing, disconnect the USB cable and turn off the printer. After a while, turn the printer back on and reconnect the USB cable. Check the printer status. - When you are printing using the button, check the print settings. PRINT ORDER ERROR - You attempted to set more than 998 still images in the print order. PRINTER COVER OPEN - Close the printer cover securely. PRINTER ERROR - A malfunction has occurred that may require repairs. (Canon PIXMA printers: the printer's green power lamp and orange error lamp flash alternately.) - Disconnect the USB cable and turn off the printer. Unplug the printer's power cord from the power outlet and contact the appropriate customer support center or service center. 110