Canon 350D Instruction Manual - Page 96
Using the Built-in Flash
View all Canon 350D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Using the Built-in Flash E-TTL II autoflash obtains high-precision and consistent flash shots. Using the Built-in Flash in the Basic Zone If necessary, the built-in flash will pop-up automatically in low-light or backlit conditions. (except in the modes) Using the Built-in Flash in the Creative Zone Regardless of the light level, you can press the button to pop-up and fire the built-in flash whenever desired. d : For fully automatic flash photography. The shutter speed (1/ 60 sec. - 1/200 sec.) and aperture value are set automatically, just as in (Full Auto) mode. s : Enables you to set the desired shutter speed (30 sec. - 1/ 200 sec.). The camera then automatically sets the flash aperture value to obtain the proper exposure at the shutter speed you have set. f : Enables you to set the desired aperture value. The camera then automatically sets the shutter speed (30 sec. - 1/200 sec.) to obtain the proper exposure at the aperture you have set. Against dark backgrounds such as the night scenes, slow-sync shooting will be set so that both the subject and background are exposed correctly. The main subject is exposed with the flash, and the background is exposured with a slow shutter speed. ¡Because automatic slow-sync shooting uses a slow shutter speed, always use a tripod. ¡ If you do not want a slow shutter speed to be set, set C.Fn-3 [Flash sync. speed in Av mode] to [1: 1/200sec. (fixed)]. (p.148) a : You can set both the shutter speed (bulb or 30 sec. - 1/200 sec.) and aperture value. The main subject is exposed properly by the flash. The background exposure will vary depending on the shutter speed and aperture. 8: The flash result will be the same as the mode. 96