Canon 350D Instruction Manual - Page 99
Check that the <, > icon is lit., Focus the subject., Press the <, > button., Take
View all Canon 350D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Using the Built-in Flash A FE lockN FE (flash exposure) lock obtains and locks the correct flash exposure reading for any part of a subject. 1 Check that the icon is lit. ¡ Press the button to pop-up the built-in flash. ¡ Press the shutter button halfway and look in the viewfinder to check that the icon is lit. 2 Focus the subject. ¡ Press the shutter button halfway. Keep pressing the shutter button halfway until step 4. 3 Press the button. (8) ¡ Aim the viewfinder center over the subject where you want to lock the flash exposure, then press the button. s The Speedlite will fire a preflash and the required flash output is calculated and retained in memory. s In the viewfinder, "FEL" is displayed for a moment and will light. ¡ Each time you press the button, a preflash is fired and the required flash output is calculated and retained in memor y. 4 Take the picture. ¡ Compose the shot and press the shutter button fully. s The flash is fired to take the picture. If the subject is too far away and beyond the effective range of the flash, the icon will blink. Get closer to the subject and repeat steps 2 to 4. 99