Canon 3623B002 User Manual - Page 29
Turning the Power ON (Scanner Recognition), About the Power Switch, Scanner Recognition
View all Canon 3623B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Chapter 2 Setup 5. Turning the Power ON (Scanner Recognition) When you turn ON the computer and the scanner, the Windows Plug and Play function recognizes the scanner and automatically installs the required device driver. About the Power Switch The power switch is located at the lower left side of the front of the scanner. Press the power switch to turn the scanner ON. (See p. 3-6.) Press the power switch again to turn the scanner OFF. Scanner Recognition The scanner will be recognized the first time it is connected to the computer. 1. Make sure that the scanner and computer are connected properly. 2. Turn ON the scanner. 3. Turn ON the computer. 4. Log onto Windows as an Administrator. 5. Windows automatically recognizes the scanner and performs the device driver installation. • Windows 2000 Power Switch IMPORTANT • When connecting the scanner to the computer using a SCSI cable, be sure to turn ON the scanner first, and then turn ON the computer. If you turn ON the computer first, the scanner may not be properly recognized by the computer. • After turning the scanner OFF, wait at least 10 seconds before turning it ON again. • If you will not be using the scanner for an extended period, disconnect the power cord from the AC outlet for safety. • Windows XP • Windows Vista 2-9