Canon 3623B002 User Manual - Page 35
Press [Enter]., When the [Auto Detection] or [Scanner's
View all Canon 3623B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
3. Confirm your settings. [ON2]: When the [Auto Detection] or [Scanner's Maximum] page size setting is selected, document page lengths up to 118.11" (3 m) can be detected. [ON1]: When the [Auto Detection] or [Scanner's Maximum] page size setting is selected, document page lengths up to 39.37" (1 m) can be detected. [OFF]: When the [Auto Detection] page size setting is selected, document page lengths up to 17.01" (432 mm) can be detected. 4. Press [Enter]. Enter Key Chapter 3 Basic Operation • When scanning with the Long Document Mode set to [ON2], if the scan is performed at 400/600 dpi or the scan is performed with the scanning mode set to color and the scanning side set to [Duplex], the image may be lost. If this occurs, scan by reducing the resolution, using black and white, or setting the scanning side to [Simplex]. • When scanning using Long Document Mode, [High-Quality Moire Reduction], [Deskew], or document orientation of [90 degrees] or [270 degrees] cannot be used. • If a sheet is loaded at a skewed angle when scanning long documents, it may be damaged by contacting both sides of the transport path. So be careful to avoid loading documents at skewed angles. • Paper jam detection may react slowly when scanning long documents, which could result in jammed documents being damaged. Be especially careful to avoid paper jams. • To feed each document page manually when scanning long documents, press the [Separation Off] key on the control panel. The current setting is indicated by blinking square brackets [ ]. 5. Press the [ ] or [ ] key to select [ON] or [OFF], and press [Enter] to accept the selection. 6. Press the Stop key to exit the User Mode. IMPORTANT • Processing may be slowed when scanning in the Long Document Mode. • When scanning with the Long Document Mode set to [ON1], if the scan is performed with the scanning mode set to color and the image quality set to [Image quality priority], the image may be lost. If this occurs, scan by using black and white or reducing the image quality. 3-5 Separation Off Key