Canon 3807B007 Setup Guide - Page 11

12 Click Quit. This completes printer driver installation. Next, select the printer to set up. 13 Click Next. 14 Select the printer to setup and click Next. 15 After entering your preferred name for the printer in Printer Name and the installation location in Location, click Register. 16 Click Finish. • To register the printer by entering its IP MEMO address, click Registering IP Address. Enter the IP address of the desired printer in IP Address and click Next. 17 Click OK. • To register another printer, click MEMO Continue Registration, and repeat steps 14 to 16. Install the User Manual 18 The following screen is displayed and paper information is updated. When the paper information has been updated, the screen is no longer displayed. 19 Next, install the User Manual. Insert the provided User Manuals CD-ROM in the CD-ROM drive. • If the same model of printer is already MEMO registered on the computer, a screen is displayed for printer selection. Select the desired printer and click Next. 20 Double-click the iPFxxxx Manual Installer icon on the CD-ROM. (iPFxxxx represents the printer model.) 21 Select the region where the printer will be used and the language of the user manual to install, and then click OK. 22 Check the message and click Continue. 23 After reading the software license agreement, click Continue. 24 Click Agree. 25 Click Install. 26 After installation is completed, click Quit. The User Manual is now installed. After you have finished setting up the printer and installing the printer driver and User MEMO Manual, we recommend performing color calibration. Color calibration compensates for changes in color from individual variation among printheads or from the printing environment, ensuring better color consistency. Perform color calibration using the provided Sample Paper, which is compatible with this process. For information on other compatible paper, refer to the Paper Reference Guide. During color calibration, on the control panel's display screen, open (settings/adj. tab) and select Adjust Printer - Calibration - Auto Adjust. The process of color calibration takes about ten minutes. 11