Canon 3807B007 Setup Guide - Page 7

9 Available printers are listed in the Search Results window. Select a printer from the list on either their IPv4 Devices or IPv6 Devices tabs and click Next. • The IPv6 Devices tab is displayed in Windows 7, Windows Vista, and MEMO Windows Server 2008. • If the printer you want to use is not displayed in the list on the IPv6 Devices tab, connect via IPv4 instead. • If the printer you want to use is not displayed in the list of printers on the IPv4 Devices tab, refer to "When the printer cannot be found on the network" on page 7 to setup and configure an IP address for the printer. 10 In the Method of Configuring IP Addresses window, enter the IP address in Configure manually, under Method of Configuring IP Addresses. Click Install to start the installation process. Also enter your preferred name for the printer in Device Name and the installation location in Printer Location under Information About Printer to Configure, as desired. The installation process begins. • If you use a DHCP server for automatic assignment of the printer's IP address, printing may no longer be possible after the printer is turned off and on. This is because a different IP address has been assigned. When using DHCP server functions, consult your network administrator and configure the settings in one of the following ways: • Configure the setting for dynamic DNS updating In the printer menu, either set DNS Dync update to On, or activate the setting Enable DNS Dynamic Update in RemoteUI. (→"Menu Settings", User Manual) (→"Configuring the Printer's TCP/IP Network Settings", User Manual) • Configure the setting for assignment of the same IP address each time the printer starts up 11 After reviewing the installation results in the Complete Installation window, click Next. 12 In the Finish window, select Restart my computer now and click Restart. 13 The printer driver settings take effect after the computer restarts. This completes printer driver installation. An iPFxxxx Support desktop icon is created after installation. (iPFxxxx represents the printer model.) Next, follow steps 12-16 on pages 5-6 to install the User Manual. ▲ ▲ ▲ ▲ When the printer cannot be found on the network If your printer cannot be found when connecting to the network for the first time, setup an IP address for the printer and then configure it on the printer. 1 When ink fills the system for the first time, after printhead adjustment is finished, specify the IP address on the printer's control panel. • When ink fills the system for the first time, do not operate the printer until printhead adjustment is finished. On the tab selection screen of the control panel, press the and keys to select (settings/adj. tab) and press OK. No Paper Loaded OK:Setting/Adj. Menu Maint. cart. Remaining Amount 㪈㪇㪇㩼 2 Use the ▲ and ▼ keys to select Interface Setup and press OK. 3 Use the ▲ and ▼ keys to select TCP/IP and press OK. 4 Enter the IP address. Navigate through the following menus using the ▲ and ▼ keys on the control panel. 1.Select IPv4 and press OK. 2.Select IPv4 Settings and press OK. 3.Select IP Address and press OK. 4.Enter the IP address. How to enter IP addresses MEMO 1. Press the and keys to select a field for inputting values. 2. Use the ▲ and ▼ keys to input values. • Pressing ▲ increases the value by one. • Pressing ▼ decreases the value by one. • Holding down either the ▲ or ▼ keys continually increases or decreases the value. 3. Press OK once you have finished. 5 Press Menu. 6 Press OK on the registration confirmation message that appears. The IP address is set on the printer. Next, restart installation of the printer driver. 7 In the Search Results window, select Specify the IP address of available printers in the network and click Next. The IP Address Specification window appears. Follow steps 8-11 on page 9 to finish installing the printer driver. 7