Canon 7355 lv7350_55_manual.pdf - Page 11

CONNECTING PROJECTOR TERMINALS OF PROJECTOR This projector has input and output terminals on its back for connecting computers and video equipment. Refer to figures on pages 11 to 13 and connect properly. S-VIDEO INPUT JACK Connect the S-VIDEO output from video equipment to this jack. (Refer to P13.) AUDIO INPUT JACKS Connect the audio output from video equipment to these jacks. (Refer to P13.) G When the audio output is monaural, connect it to L (mono) jack. VIDEO INPUT JACKS Connect the composite video output from video equipment to Y jack or connect the component video outputs to Y, Pb/Cb and Pr/Cr jacks. (Refer to P13.) DVI - I RGB IN-2 AUDIO R IN L VIDEO IN Y Pb/Cb Pr/Cr S - VIDEO IN COMPUTER AUDIO IN AUDIO R OUT L RESET MCI / WI RGB IN-1 CONTROL PORT AUDIO OUTPUT JACKS Connect an external audio amplifier to these jacks. (Refer to P12, 13.) RESET BUTTON This projector uses a micro processor to control this unit, and occasionally, this micro processor may malfunction and need to be reset. This can be done by pressing RESET button with a pen, which will shut down and restart the unit. Do not use RESET function excessively. CONTROL PORT CONNECTOR When controlling the computer with Remote Control Unit of this projector, connect the mouse port of your personal computer to this connector. (Refer to P12.) RGB INPUT 1 (ANALOG) TERMINAL Connect a computer output to this jack. (Refer to P12.) COMPUTER AUDIO INPUT JACK Connect the audio output (stereo) from computer to this jack. (Refer to P12.) RGB INPUT 2 (DIGITAL/ANALOG) Media Card Imager / Wireless Imager TERMINAL Connect computer output (Digital / Analog DVI-I type), Media Card Imager*, or Wireless Imager* to this terminal. *optional accessories USB CONNECTOR (Series B) When controlling the computer with Remote Control Unit of this projector, connect USB port of your personal computer to this connector. (Refer to P12.) ✽ Do not press this button. This button is used for our optional accessories. 11