Canon 7355 lv7350_55_manual.pdf - Page 20

BASIC OPERATION ADJUSTING SCREEN ZOOM ADJUSTMENT 1 Press ZOOM button on Top Control or ZOOM L/M button on Remote Control Unit. The message "Zoom" is displayed. 2 Press ZOOM L button or POINT UP button to make image larger, and press ZOOM M button or POINT DOWN button to make image smaller. Zoom Message disappears after 4 seconds. FOCUS ADJUSTMENT 1 Press FOCUS button on Top Control or FOCUS L/M button on Remote Control Unit. The message "Focus" is displayed. 2 Adjust focus of image by pressing FOCUS L/M button or POINT UP/DOWN button(s) . Focus Message disappears after 4 seconds. KEYSTONE ADJUSTMENT If a projected picture has keystone distortion, correct image with KEYSTONE adjustment. 1 Press KEYSTONE button on Top Control or on Remote Control Unit, or select Keystone on SETTING menu. (Refer to P35.) Keystone dialog box appears. 2 Correct keystone distortion by pressing POINT UP/DOWN/LEFT/RIGHT button(s). Press POINT UP button to reduce the upper part of the image, and press POINT DOWN button to reduce the lower part. Press POINT LEFT button to reduce the left part, and press POINT RIGHT button to reduce the right part. • Arrows are blue in no correction. • Arrow(s) of direction being corrected turn(s) light blue. • Arrow(s) disappear(s) at the maximum correction. Reduce the upper width with POINT UP button. Reduce the lower width with POINT DOWN button. Reduce the left part with POINT LEFT button. Reduce the right part with POINT RIGHT button. TURBO BRIGHT FUNCTION Turbo Bright System enhances picture brightness. When BRIGHT button is pressed to on, the message "Bright on" is displayed and BRIGHT button lights orange. To return to original picture brightness, press BRIGHT button again. ✽ When Turbo Bright System is set to on, the color of image may change slightly. Bright on Message disappears after 4 seconds. 20