Canon BJ-200 User Manual - Page 69
Printing Problems - bj 200e drivers
View all Canon BJ-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Printing Problems This section contains problems and solutions related to your printer or the software you are using. Printout is Wrong If strange characters appear in your output, there may be a communications problem between the printer and your computer. If your printed output does not appear as you expect, follow these steps: 1. Make sure your cable connections are secure. 2. Check that the printer control mode (BJ-10 or Epson LQ) matches the printer driver you selected. See Chapter 5, Using the Printer With Your Software, for details on selecting a printer driver and a printer control mode. NOTE: Make sure your interface cable is no longer that 6.6 feet. Avoid using A/B switch boxes or switch boxes that have a total cable length of more than 6.6 feet. Characters on Screen Do Not Match Printed Characters Many graphics characters and special symbols are produced by different ASCII codes on each make of computer and printer. Set the correct character table and printer control mode with the DIP switches. If you would like to receive a printout for the character sets available in BJ-10 mode and Epson LQ mode, you can use Canon's toll-free fax retrieval system. Call the Canon help desk at 1-800-423-2366 and ask for the fax retrieval system. Then request the BJ-200e Printer Command Summary. This document includes samples of each available character set. Printing Beyond Edge of Page If the printer is printing only part of each line, follow these steps: 1. Make sure the paper is aligned correctly in the sheet feeder. 2. Check the software setting for the correct margins. 3. Check the setting of DIP switch 1. This DIP switch controls the horizontal print position: T For letter-size paper, set it to OFF.