Canon BJ-200 User Manual - Page 75
Epson LQ Mode, function properly. - driver windows 7
View all Canon BJ-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
When DIP switch 12 is OFF, the printer control mode is set by DIP switch 11 (OFF selects BJ-10 mode, ON selects Epson LQ mode). Automatic emulation mode is applicable for MS-DOS applications only. When you are using Windows, the BJ-200e printer driver for Windows selects the appropriate control mode regardless of the settings of DIP switches 11 and 12. Setting DIP switch 12 ON reduces the input buffer by 9.4 KB. When using Windows, set DIP switches 10, 11 and 12 OFF to maximize the size of your input buffer (50.4 KB). NOTE: T If the printer does not seem to be switching between BJ-10 and Epson LQ mode, disable this function and set DIP switch 11 to match your application's printer driver. T If you are using a printer switching device, you must allow at least ten seconds for the printer to recognize an emulation change. If your printer switching device switched data in less than ten seconds, automatic emulation switching will not function properly. Epson LQ Mode When the printer is in Epson LQ mode (DIP switch 11 is ON), you can set the DIP switches to control the following functions: DIP switch 1 Function Horizontal print position 2 3 4 5, 6, 7 8, 9, 10 Text scale mode Page length Character set International Character Set Typeface OFF Letter size or COM 10 envelope Disabled 11 inches Italics See following descriptions See below ON A4 size or DL size envelope Enabled 12 inches Graphics