Canon CanoScan 3200F CanoScan 3200/3200F Quick Start Guide - Page 13

Scanning Film (for CanoScan 3200F only) Scanning Film (for CanoScan 3200F only) You can scan a single frame of 35 mm film (strips or slides) with CanoScan 3200F. Positioning the Film 1 Remove the protective sheet from the document cover. Slide the protective sheet up to remove it. When you finish scanning, replace the protective sheet by aligning it with the grooves in the document cover and sliding it downward into place. • Store the protective sheet in a safe place so that it will not get bent or broken. • Always replace the protective sheet when you are not scanning film to prevent the light source section from getting scratched. 2 Insert a fingernail into the slot in the Film Guide and Film Holder remove the Film Holder. 3 Place the film face down into the groove in the Film Guide. 35 mm Strip Align the frame you wish to scan with the Film Guide's window. Slide Place a slide face down over the Film Guide's window. • Hold the film by the edges with your fingertips to avoid getting fingerprints or dirt on the film surface. • Remove dust from the film, the document glass and the light source. 11