Canon CanoScan LiDE90 LiDE 90 Quick Start Guide Instructions - Page 2
Specifications, Scanning in the Upright Position - canoscan lide 25
View all Canon CanoScan LiDE90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Scanning in the Upright Position This scanner can be used in the upright position. Use the supplied stand when scanning on the stand. Setting the Stand Positioning an item Put the scanner on the stand, fitting the two holes on the scanner Place a document on the document glass. side to the projections on the stand. Removing the Stand To remove the scanner from the stand, press the hook. Lean the scanner toward the stand. Release the scanner from the hook. Close the document cover carefully to prevent the document from moving over. Fasten the stand hook to the marked position on the scanner until it clicks. Lift the scanner off. Refer to the Scanning Guide (on-screen manual) for further information about ScanGear, MP Navigator EX, Scanner Buttons, and Troubleshooting. To start the Scanning Guide, double-click the on-screen manual icon on the desktop. In this guide, Windows Vista screen shots are used to illustrate explanations common to all operating systems. Specifications Scanner Type Sensor Type Light Source CanoScan LiDE 90 Flatbed CIS (Color Contact Image Sensor) 3-color (RGB) LED Optical Resolution *1 2400 x 4800 dpi Selectable Resolution 25-19200 dpi (ScanGear) Scanning Bit Depth Color Grayscale 16 bit input/16 bit or 8 bit output for each color 16 bit input /8 bit output Scanning Speed *2 (Photo or Document) Color Grayscale, B&W 2.7 msec./line (300 dpi), 5.0 msec./line (600 dpi), 9.6 msec./line (1200 dpi), 18.9 msec./line (2400 dpi) 2.3 msec./line (300 dpi), 1.7 msec./line (600 dpi), 3.2 msec./line (1200 dpi), 6.3 msec./line (2400 dpi) Interface USB 2.0 Hi-Speed Maximum Document Size A4/Letter: 216 x 297 mm Scanner Buttons 4 buttons (COPY, PHOTO, PDF, E-MAIL) Operating Range Temperature Humidity 5°C to 35°C (41°F to 95°F) 10% to 90% RH without condensation formation Power Requirements Supplied via USB port (No external adapter required) Power Consumption In operation: 2.5 watts maximum, Stand-by: 1.0 watts, Suspend: 9 mwatts Exterior Dimensions (W) x (D) x (H) 250 x 364 x 40 mm (9.9 x 14.4 x 1.6 in.) Weight Approximately 1.6 kg (3.5 lbs.) *1 Optical Resolution represents the maximum sampling rate based on ISO 14473. *2 The fastest speed in USB 2.0 Hi-Speed mode on Windows PC. Transfer time is not included. Scanning speed varies according to the document types, scan settings, or specifications of the computer. • Specifications are subject to change without notice. Model Number: K10300 (CanoScan LiDE 90) FCC Notice (U.S.A. Only) Model Number : K10300 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Use of a shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC Rules. Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A., Inc. One Canon Plaza Lake Success, NY 11042 1-516-328-5600 As an ENERGY STAR® Partner, Canon Inc. has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Warning When you use this product, you should pay attention to the following legal issues: • Scanning of certain documents, such as bank notes (bank bills), government bonds and public certificates, may be prohibited by law and may result in criminal and/or civil liability. • You may be required under law to obtain authorization from a person possessing copyrights or other legal rights to the item being scanned. If you are uncertain of the legality of scanning any particular item, you should consult your legal adviser in advance. • Microsoft is a registered trademark of Microsoft Corporation. • Windows is a trademark of Microsoft Corporation, registered in the U.S. and other countries. • Windows Vista is a trademark of Microsoft Corporation. • Macintosh and Mac are trademarks of Apple Inc., registered in the U.S. and other countries. • Adobe is either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and or other countries. • ©ArcSoft, Inc. All rights reserved for PhotoStudio. • Other names and products not mentioned above may be registered trademarks or trademarks of their respective companies.