Canon Color imageCLASS LBP654Cdw imageCLASS LBP654Cdw/LBP612Cdw User Guide - Page 48
Manually entering an IP address, Restart the machine.
View all Canon Color imageCLASS LBP654Cdw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Setting Up ● Select in , and select . Black and white LCD model ● Select . If you do not want to use DHCP/BOOTP/RARP to assign an IP address ● Select . If you select when these services are unavailable, the machine will waste time and communications resources searching the network for these services. 3 Check that is set to . ● If is selected, change the setting to . 4 Select . ● IP addresses assigned via DHCP override the address obtained via Auto IP. Manually entering an IP address 1 Configure a setting to disable auto-acquisition. Touch panel model ● Select , and select in . Black and white LCD model ● Select , and set both and to . 2 Select . 3 Specify the IP address, subnet mask, and gateway address (or default gateway). Touch panel model ● Enter , , and , and select . Black and white LCD model ● Enter these values in each screen using the numeric keys, and press . 5 Restart the machine. ● Turn OFF the machine, wait for at least 10 seconds, and turn it back ON. Checking whether the settings are correct ● Make sure that the Remote UI screen can be displayed with your computer ( Starting Remote UI(P. 274) ). If a computer is not available, you can check the connection by using the operation panel ( Testing the Network Connection(P. 43) ). When you have changed the IP address after installing the printer driver ● You need to add a new port. Configuring Printer Ports(P. 54) 42