Canon Color imageCLASS MF632Cdw imageCLASS MF634Cdw/MF632Cdw Getting Started - Page 32

Appendix DDD (Direct Distance Dial) line operation of this equipment. When such equipment must also be installed using an -or- changes are necessary, the telephone company acceptable method of connection. In some IDDD (International Direct Distance Dial) line if is required to give adequate prior notice to the cases, the company's inside wiring associated you communicate overseas user. with a single line individual service may be [NOTE] Canon recommends an individual line following industry standards, i.e.,2,500 (touch-tone) or 500 (rotary/pulse dial) telephones. A dedicated extension off a PBX (Private Branch eXchange) unit without "Call Waiting" can be used with your facsimile unit. Key telephone systems are not recommended because they send nonstandard signals to individual telephones for ringing and special codes, which may cause a facsimile error. C. Power Requirements The machine should be connected to a standard 120 volt AC, three-wire grounded outlet only. Do not connect this machine to an outlet or power line shared with other appliances that cause "electrical noise." Air conditioners, electric typewriters, copiers, and machines of this sort generate electrical noise that often interferes with communications equipment and the sending and receiving of documents. However, if advance notice is not possible, the telephone company will notify the customer as soon as possible. Also, the customer will be advised of his/her right to file a complaint with the FCC if he/she believes it is necessary. WARNING The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including FAX machines, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.) extended by means of a certified connector assembly (telephone extension cord). The customer should be aware that compliance with the above conditions may not prevent deterioration of service in some situations. • Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. • Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines, and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Connection of the Equipment This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the rear panel of this equipment is a label that contains, among other information, a [NOTE] In order to program this information into your machine, you should complete the procedure for registering your name, unit's telephone number, time, and date in the Getting Started. CAUTION • Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate. product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the Users in Canada Pre-Installation Requirements for Canon Facsimile Equipment A. Location Supply a suitable table, cabinet, or desk for the machine. See the User's Guide for specific dimensions and weight. [NOTE] This equipment complies with the Canadian ICES-003 Class B limits. English This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. The Ringer Equivalence Number (REN) indicates the maximum number of devices allowed to be sum of RENs should not exceed five (5.0). B. Order Information connected to a telephone interface. The To be certain of the number of devices that may 1. A single telephone line (touch-tone or rotary) termination of an interface may consist of any be connected to a line, as determined by the should be used. combination of devices subject only to the total RENs, contact the local telephone company. 2. Order a CA11A modular jack, which should be requirement that the sum of the RENs of all the For products approved after July 23, 2001, the installed by the telephone company. If the devices not exceed five. REN for this product is part of the product CA11A jack is not present, installation cannot Français [ French ] Le présent produit est identifier that has the format US: occur. conforme aux spécifications techniques AAAEQ##TXXXX. 3. Order a normal business line from your applicables d'Innovation, Sciences et The digits represented by ## are the REN without telephone company's business representative. Développement économique Canada. a decimal point (e.g., 03 is a REN of 0.3). The line should be a regular voice grade line L'indice d'équivalence de la sonnerie (IES) sert à An FCC compliant telephone line cable and or an equivalent one. Use one line per unit. indiquer le nombre maximal de dispositifs qui modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or premise wiring using a compatible modular jack that is Part 68 compliant. DDD (Direct Distance Dial) line -orIDDD (International Direct Distance Dial) line if you communicate overseas peuvent être raccordés à une interface téléphonique. La terminaison d'une interface peut consister en une combinaison quelconque de dispositifs, à la seule condition que la somme des IES de tous les dispositifs n'excède pas cinq. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subjected to state tariffs. [NOTE] Canon recommends an individual line following industry standards, i.e., 2,500 (touch-tone) or 500 (rotary/pulse dial) telephones. A dedicated About This Manual En In Case of Equipment Malfunction Should any malfunction occur which cannot be corrected by the procedures described in this guide or the User's Guide, disconnect the equipment from the telephone line cable and disconnect the power cord. extension off a PBX (Private Branch eXchange) unit without "Call Waiting" can be used with your facsimile unit. Key telephone systems are not recommended because they send nonstandard signals to individual telephones for ringing and special codes, which may cause a facsimile error. Keys and Buttons Used in This Manual The following symbols and key names are a few examples of how keys to be pressed are expressed in this manual. • Operation panel keys: [Key icon] Example: The telephone line cable should not be C. Power Requirements • Display: reconnected or the power switch turned ON The power outlet should be a three-prong • Buttons and items on the computer display: until the problem is completely resolved. Users grounded receptacle (Single or Duplex). It should [Preferences] should contact Canon Authorized Service be independent from copiers, heaters, air Illustrations and Displays Used in This Manual Facilities for servicing of equipment, Information conditioners, or any electric equipment that is Illustrations and displays used in this manual are regarding Authorized Service Facility locations thermostatically controlled. The rated value is which of Color imageCLASS MF634Cdw unless can be obtained by calling Canon Customer Care 115 volts and 15 amperes. The CA11A modular specified. Center (1-800-OK-CANON). Rights of the Telephone Company jack should be relatively close to the power outlet to facilitate installation. Trademarks Mac is a trademark of Apple Inc. If this equipment (Color imageCLASS [Notice] Microsoft, Windows, Windows Vista, Windows MF634Cdw) causes harm to the telephone • The REN of this product is 1.0. Server, Internet Explorer, Excel, and PowerPoint network, the telephone company may • Before installing this equipment, users should are either registered trademarks or trademarks of temporarily disconnect service. The telephone ensure that it is permissible to be connected Microsoft Corporation in the United States and/ company also retains the right to make changes to the facilities of the local or other countries. in facilities and services that may affect the telecommunications company. The 32