Canon Color imageCLASS MF632Cdw imageCLASS MF735Cdw/MF733Cdw/MF731Cdw/MF634Cdw - Page 51
Configuring Printer Ports, Displaying the Printer FolderP. 730
View all Canon Color imageCLASS MF632Cdw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Setting Up Configuring Printer Ports 1W2U-00W Printing errors can occur when the IP address of the machine has been changed, or when a printer has been added via the Windows printer folder. These errors are typically caused by incorrect printer port settings. For example, an incorrect port number or port type may have been specified. In such situations, your attempt to print fails because the document data cannot reach the machine. To fix this type of problem, configure the printer port settings on the computer. ● To perform the following procedure, log in to your computer with an administrator account. 1 Open the printer folder. Displaying the Printer Folder(P. 730) 2 Right-click the driver icon for this machine, and click [Printer properties] or [Properties]. 3 Click the [Ports] tab and configure the required settings. Adding a port If you have changed the IP address of the machine or you have selected an incorrect port while installing drivers from the Windows printer folder, add a new port. There are two types of port: "MFNP Port" and "Standard TCP/IP Port." Select the port type according to your environment. MFNP Port (only for IPv4 environment) This is a port that allows the IP address of the machine to be detected automatically. Even if the IP address of the machine is changed, the connection is maintained, provided that the machine and the computer are in the same subnet. You do not need to add a new port every time the IP address is changed. If you are using the machine in an IPv4 environment, you should normally select this type of port. ● You can add an MFNP port only when you installed the driver from the provided DVD-ROM, or when you downloaded and installed the printer driver or the fax driver from the Canon website. 43