Canon Color imageCLASS MF8170c imageCLASS MF8170c Network Guide - Page 11
Specifying the Network Settings, TCP/IP Network Setup Procedures - printer
View all Canon Color imageCLASS MF8170c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Specifying the Network Settings 2 CHAPTER This chapter describes the settings and procedures necessary to connect and use the machine with a TCP/IP network. TCP/IP Network Setup Procedures To use a TCP/IP network, it is necessary to perform the following procedures. Network Cable Connection (See "To Use the Machine as a Network Printer 1 (Network Connection)," in the Set-Up Instructions for Networking and Printing.) Connect the network cables in accordance with the Set-Up Instructions for Networking and Printing. 2 Preparation for Protocol Settings (See "Preparation for Protocol Settings," on p. 2-3.) Specify the machine's basic protocol settings for communication between the machine and computers using the machine. To specify the settings, use: • The machine's operation panel • NetSpot Device Installer (Canon utility software included in the User Software CD) • ARP/PING commands 3 Protocol Settings (See "Protocol Settings," on p. 2-10.) Specify the machine's advanced protocol settings. To specify the settings, use: • NetSpot Console (via a web browser) (Canon utility software) • A web browser (Remote UI) 4 Computer Settings for Printing (See "Setting Up a Computer for Printing," on p. 2-15.) Specify the settings for each computer you use for printing. IMPORTANT • It is recommended that the network manager perform steps 1, 2, and 3 above. TCP/IP Network Setup Procedures 2-1