Canon D1170 imageCLASS D1180/D1170/D1150/D1120 Basic Operation Guide - Page 170
ECM Transmission
UPC - 013803106824
View all Canon D1170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
ECM Transmission ECM Transmission ECM (Error Correction Mode) reduces the effect of system and line errors on documents that occur during sending or receiving with another fax machine that supports ECM. If the other machine does not support ECM, this setting is ignored. If transmission speed appears to be extremely slow, you may be able to speed up transmission time by turning ECM off. The default setting is . - If you want to transmit using ECM, it is necessary that ECM Transmission be set in both the destination machine and this machine. This function does not operate unless ECM is set in both machines. - Even when ECM is set, errors can sometimes occur due to a poor telephone line connection. - If there is trouble with the line, it will take more time to send the documents. 1 Press [Menu]. 2 Press or to select , then press [OK]. MENU 4.TX/RX SETTINGS 3 Press or to select , then press [OK]. TX/RX SETTINGS 3.FAX SETTINGS 4 Press or to select , then press [OK]. FAX SETTINGS 3.TX SETTINGS 5 Press or to select , then press [OK]. TX SETTINGS 1.ECM TX 6 Press , to select or , then press [OK]. ECM TX ON - : The ECM transmission is not activated. - : The ECM transmission is activated. 7 Press [Stop/Reset] to return to the standby mode. Fax (D1180/D1170/D1150) 6-39