Canon D1170 imageCLASS D1180/D1170/D1150/D1120 Basic Operation Guide - Page 61
Repeat this step five times for each set of, five envelopes. - poor print quality
UPC - 013803106824
View all Canon D1170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Documents and Print Media Loading Paper - When loading paper into the multi-purpose tray, align the paper stack neatly between the slide guides. If the paper is not loaded correctly, a paper jam may occur. - If you are printing on heavyweight paper or envelopes using the multi-purpose tray, and find that the paper or envelopes are not being fed smoothly or evenly through the multipurpose tray, remove the paper or envelopes, curl the feeding edges upward approximately 1/8" (3 mm), and then reload the paper or envelopes. Curling the feeding edges enables the rollers to grip the paper or envelopes as they are fed into the machine from the multipurpose tray. - If there are instructions on the paper package about which side of the paper to load, follow those instructions. - When the paper is loaded into the multipurpose tray, the side facing down is the one printed on. - If problems, such as poor print quality or paper jams occur, try turning the paper stack over and reload it. ■ If you are loading envelopes into the multipurpose tray: ① Take five envelopes, loosen them as shown, and then stack them together. Repeat this step five times for each set of five envelopes. ② Place the envelopes on a clean, level surface, and press all the way around the envelopes by hand, in the direction of the arrows, to remove any curls. Repeat this step five times for each set of five envelopes. Take particular care to spread the envelopes out in the direction that they will be fed. 2-14