Canon D340 imageCLASS D320/D340 Basic Guide - Page 21
Loading Envelopes in the Cassette
UPC - 013803082364
View all Canon D340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Loading Envelopes in the Cassette • The recommended envelopes are COM10, MONARCH, DL, ISO-C5. IMPORTANT Using other envelopes may affect the quality of the copy image. 1 Arrange the stack of envelopes on a firm, clean surface, and press down firmly on the edges to make the folds crisp. • Press all the way around the envelopes to remove any curls and expel air from inside the envelopes. Also, press firmly on the area that corresponds to the edges of the back flap. • If the envelope to be loaded has a flap on the short edge, this edge must enter the machine first. Not loading it this way will result in paper jams. • After loading envelopes, push them lightly toward the inside of the machine. • The cassette holds up to approximately 20 envelopes. 2 Remove any curling from the envelopes by holding the edges diagonally and bending them gently. 5 Adjust the slide guides to fit the size of the envelopes. • Adjust the slide guides so that there is no space between the slide guides and the edge of the envelopes. 3 Run a pen or other rounded object along the back flaps to flatten them. • The flaps should not bulge more than 0.2 inch (5 mm). 6 Specify the envelope size and type. Flap • Press Additional Functions, then select: PAPER SETTINGS PAPER SIZE ENVELOPE Use 4 (-) or e (+) to select the envelope type 4 Even the edges of the envelopes and load them in the cassette. • Position the envelopes with the print side up (flaps should not be visible) and load them so that the (COM10, MONARCH, DL, ISO-C5). To set the Additional Functions, see "Accessing the Additional Functions". (→ p. 9-1) • For details, refer to "Specifying the Paper Size and the Type (Common for Cassette and Multi-purpose Tray)". (→ p. 4-3) left side (sender's address side) feeds first in the cassette. 2-4