Canon DC100 DC100 Instruction Manual - Page 66
Troubleshooting - battery replacement
UPC - 082966162206
View all Canon DC100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Tr Trouble? oubleshooting If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a Canon Service Center if the problem persists. Power Source Problem Solution • Camcorder will not turn on. Battery pack is exhausted. Replace or charge the battery 17 • The camcorder switches off pack. by itself. • The disc compartment cover will not open. Attach the battery pack correctly. • LCD/viewfinder switches on and off. Battery pack will not charge. Charge the battery pack in temperatures between 0 °C and - 40 °C (32 °F and 104 °F). Battery packs become hot with use and may not charge. The - charging will start once the battery pack temperature is below 40 °C (104 °F). The battery pack is damaged. Use a different battery pack. - Recording/Playback Problem Solution Buttons will not work. Turn on the camcorder. - Load a disc. 22 Abnormal characters appear Disconnect the power source and reconnect it after a short - on the screen. The camcorder time. If the problem still persists, disconnect the power source does not operate properly. and press the RESET button with a pointed item. Pressing the RESET button resets all settings. " " flashes on the screen. Load a disc. 22 " " flashes on the screen. Battery pack is exhausted. Replace or charge the battery 17 pack. Video noise appears on screen. When using the camcorder in a room where a plasma TV is - located, keep a distance between the camcorder and the plasma TV. Video noise appears on the When using the camcorder in a room where a TV is located, - TV screen. keep a distance between the compact power adapter and the power or antenna cables of the TV. Even without a disc loaded, The camcorder is checking if a disc is loaded or not. This is not - when closing the disc a malfunction. compartment cover a motor sound can be heard. The disc cannot be ejected. Turn off the camcorder, disconnect the compact power - adapter and remove the battery pack. Restore the power supply and try again. The camcorder has exceeded its operational temperature. Disconnect the compact power adapter and remove the battery pack and let the camcorder cool down before resuming use. The disc cannot be recognized. The disc is dirty. Clean the disc with a soft lens-cleaning cloth. 72 If the problem persists replace the disc. The disc is not correctly loaded. Check the disc. 22 The camcorder vibrates. Depending on the condition of the disc, the camcorder might - vibrate occasionally. This is not a malfunction. 66