Canon DC20 Digital Video Software (Macintosh) Ver.19 Instruction Manual - Page 9

Before Downloading Still Images Connecting the Camcorder to a Computer E  Be sure to install the Digital Video Software before you connect the camcorder to the computer.  Make sure the camcorder is being powered using the power adapter before connecting it to a computer.  Connect the USB cable directly to one of the computer's main USB ports. The interface may not function correctly if the camcorder is connected via a USB hub.  The connection may not operate correctly if you are using other USB devices, excluding USB mice or keyboards, at the same time. If this occurs, disconnect the other devices from the computer and try reconnecting the camcorder.  Do not connect two or more camcorders to the same computer via the USB interface. The connections may not operate correctly.  Never allow the computer to go into standby (sleep) mode while a camcorder is connected via the USB interface.  Refer to your computer manual for the location of the computer's USB ports.  See your camcorder instruction manual for how to connect the camcorder to the computer and how to change the media setting (MEDIA SEL. ) in the SYSTEM SETUP menu. 1 Insert a disc or a memory card containing images into the camcorder. 2 Connect the power adapter to the camcorder. 3 Turn the power switch to PLAY and move the / switch to . Wait until the camcorder's access indicator stops flashing. 4 To download still images on the disc, select [DISC] in the SYSTEM SETUP menu. To download still images on the card, select [CARD] in the SYSTEM SETUP menu. 5 Attach the supplied USB cable to the computer's USB port and the camcorder's USB Terminal. Macintosh Camcorder End Computer End USB Cable USB Terminal on the Camcorder USB Port on the Computer Before Downloading Still Images 9