Canon EOS-1D C EOS-1D X Wired LAN Instruction Manual - Page 28

Automatic Image Transfer After Each Shot 5 Select the size and type of images to transfer. To transfer smaller JPEGs when the camera is set up to record larger JPEGs to one card and smaller JPEGs to the other, set [JPEG size to trans.] to [Smaller JPEG]. To transfer either RAW or JPEG images when the camera is set up to record RAW images to one card and JPEGs to the other, specify which images to transfer in the [RAW+JPEG transfer] setting. Similarly, complete the same setting when RAW+JPEG images are recorded simultaneously to a single memory card. When images of the same size are recorded to both cards simultaneously, images recorded to card 1 are transferred, regardless of image quality (compression). Auto Retry if Transfer Fails If transfer fails, the lamp on the camera blinks in red. In this case, press the button, select [Communication settings] on the [53] tab, and press . When the screen shown on the left is displayed, check the error number and see page 84 to eliminate the cause of the error. Once the cause of the error is eliminated, the images whose transfer previously failed will be transferred automatically. With this option activated, transfer is attempted again automatically after failure, both when automatic transfer is used and when transferring captured images via FTP. Note that when you cancel image transfer, or turn off the camera, the image will not be re-transferred automatically. See page 34 and transfer the image manually. 28