Canon EOS C300 PL Instruction Manual - Page 119
Low Key Satur.], Knee], Sharpness], Enable]: Activates/deactivates the setting. Default: [Off]
View all Canon EOS C300 PL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Custom Picture Settings Black Gamma 119 Output Point Input [Low Key Satur.] Adjusts color saturation in dark areas. [Enable]: Activates/deactivates the setting. (Default: [Off]) [Level]: Specifies how saturated colors are in dark areas. This setting can be adjusted from -50 to 50. (Default: ±0) [Knee] Controls the upper part of the gamma curve (highlights of the image). By compressing the highlights, you can prevent parts of the image from being overexposed. When [Gamma] is set to [Cine 1], [Cine 2], [EOS Std.], [Wide DR] or [Canon Log], this setting has no effect on the picture. [Enable]: [Slope]: Activates/deactivates the setting. (Default: [On]) Determines the slope of the gamma curve above the knee point. This setting can be adjusted from -35 to 50. (Default: ±0) [Point]: Sets the knee point of the gamma curve. This setting can be adjusted from 50 to 109. (Default: 95) [Saturation]: Adjusts color saturation in highlights. This setting can be adjusted from -10 to 10. (Default: ±0) Knee Slope Knee Point Output Output Input Input [Sharpness] Sets the sharpness of the output and recording signal. [Level]: Sets the sharpness level. This setting can be adjusted from -10 to 50. (Default: ±0) [H Detail Freq.]: Sets the center frequency of horizontal sharpness. Setting higher values increases the frequency, which, in turn, increases the sharpness. This setting can be adjusted from -8 to 8. (Default: ±0) [Coring]: Reduces noise artifacts caused by high sharpness levels.