Canon FS30 FS30/FS31/FS300 Instruction Manual - Page 90
Picture and Sound, Memory Card and Accessories
View all Canon FS30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Additional Information battery pack is too cold, warm it up. If the battery pack is too hot, let it cool down until its temperature is below 40 °C (100 °F). - Charge the battery pack in temperatures between 0 °C and 40 °C (32 °F and 104 °F). - The battery pack is damaged. Use a different battery pack. Picture and Sound The LCD screen appears dim. - The LCD screen dimmer is on. To turn it off, press DISP. for 2 seconds or more. Screen displays turn on and off repeatedly. - The battery pack is exhausted. Replace or charge the battery pack ( 19). - Remove the battery pack and reattach it correctly. Abnormal characters appear on the screen and the camcorder does not operate properly. - Disconnect the power source and reconnect it after a short time. If the problem still persists, disconnect the power source and press the RESET button with a pointed item. Pressing the RESET button resets all settings. Video noise appears on screen. - When using the camcorder close to devices that emit strong electromagnetic fields (plasma TVs, cellular phones, etc.), keep a distance between the camcorder and these devices. Sound is distorted or is recorded at lower levels. - When recording near loud sounds (such as fireworks, shows or concerts), sound may become distorted or it may not be recorded at the actual levels. This is not a malfunction. The picture is displayed correctly but there is no sound from the built-in speaker. - Speaker volume is turned off. Adjust the volume ( 36). - If the STV-250N Stereo Video Cable is connected to the camcorder, disconnect it. Memory Card and Accessories Cannot insert the memory card. - The memory card was not facing the correct direction. Turn the memory card over and insert it ( 30). Cannot record on the memory card. - The memory card is full. Erase some recordings to free some space or replace the memory card. - Initialize the memory card ( 31) when you use it with the camcorder for the first time. - The LOCK switch on the SD or SDHC memory card is set to prevent accidental erasure. Change the position of the LOCK switch. - In order to record movies, a compatible memory card must be inserted ( 29). - The folder and file numbers have reached their maximum value. Set [PHOTO NOS.] to [RESET] ( 85) and insert a new memory card. - The camcorder may not be able to record on a memory card that was recorded on with another device. 90