Canon JX200 FAX-JX200/JX201 User'sGuide - Page 41

Name ACTIVITY REPORT AUTO PRINT TX/RX SEPARATE Description Settings Enable/disable automatic printing of the activity report. - When you set ON, your fax is set to print an activity report for ON/OFF every 20 transactions (sending and receiving). Divide the activity management report into sent and received ON/OFF transactions. „ TX SETTINGS Name ECM TX PAUSE TIME AUTO REDIAL REDIAL TIMES REDIAL INTERVAL DIAL TONE DETECT Description Settings Enable/disable error correction during transmission. ON/OFF Set the length of the pause you insert into a dialing sequence. 1 to 9 seconds Determine whether the fax will redial a number if it fails to get ON/OFF a response on the first attempt. Set the number of retries. 1 to 10 times Set the period of time between redialing attempts. 2 to 99 minutes Set whether to send faxes after detecting the dial tone. This ON/OFF function may not work correctly with some telephone lines. „ RX SETTINGS Name Description Settings ECM RX Enable/disable error correction during reception. ON/OFF FAX/TEL AUTO SW This feature is used to answer calls, and if no fax tone is - detected, the fax rings to alert you of an incoming call. RING START TIME Set the duration that the fax listens for a fax tone before starting to ring. 0 to 20 seconds TEL RING TIME Set the length of time the fax will ring to alert you of an incoming call. 10 to 60 seconds DEFAULT ACTION Select the action taken after the TEL RING TIME expires. DISCONNECT/ RECEIVE INCOMING RING Set the fax to ring when it receives a call. ON/OFF RING COUNT Set the number of incoming rings before the fax answers. 2 to 30 times* MAN/AUTO SWITCH Determine if the fax switches to document receive mode after ON/OFF the fax rings for a specified time when the fax is in the manual receive mode. RING TIME Set the amount of time the fax will ring before switching to document receive mode. 1 to 60 seconds REMOTE RX Enable/disable remote receiving. ON/OFF REMOTE RX ID If you set REMOTE RX to ON, you can select the remote receiving ID. 00 to 99 SAVE RX IMAGE Set whether to save images received. ON/OFF OPTION SETTINGS Set whether the fax prints out received documents even when the ink level is low. Faxes will be deleted from memory after printing. If there is no ink left, the information contained in the fax will be lost. This setting will be retained even if the FINE cartridge is replaced with a new cartridge. ON/OFF DRPD:SELECT FAX If you select DRPD as the receive mode, select the ring pattern for the fax. NORMAL RING DOUBLE RING SHORT-SHORT-LONG SHORT-LONG-SHORT OTHER RING TYPE * The values may differ depending on the country/region of use. Settings and Activity Reports 39